 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Hyundai Cars / February 2006Shiftronic trans on 2001 Santa Fe
Once again,the tranny keeps on slipping into using only 2nd and 3rd gear. The check engine light goes on.I've had a sensor replaced and that seemed to take care of the problem for a while.But the problem is back! Any thoughts out there?? I'd start by having the PCM (powertrain control module) checked out, as well as the electronics in the transmission itself. If you're asking for a "do-it-yourself" solution, I don't think there are many left. It sure sounds like an electronic gremlin to me. Tom Wenndt > Once again,the tranny keeps on slipping into using only 2nd and 3rd gear. > The check engine light goes on.I've had a sensor replaced and that seemed > to take care of the problem for a while.But the problem is back! Any > thoughts out there?? > Once again,the tranny keeps on slipping into using only 2nd and 3rd gear. > The check engine light goes on.I've had a sensor replaced and that seemed > to take care of the problem for a while.But the problem is back! Any > thoughts out there?? If the check engine light comes on, what code is it? If it says it's the same sensor, either the replacement is bad (not likely for two in a row), its the connector, wiring, or the pcm. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.