 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Hyundai Cars / January 2007'03 Santa Fe Crank Shaft Pully doesn't have Left Hand threads, right?
I wanted to be sure I am not trying to loosen it the wrong way... it isn't left hand threads, is it? 2.7 Litre V6. TIA No, it is RH threads... if you cannot get it lose even with an impact wrench, try wedging a long breaker bar (with its socket on the crank shaft pully bolt) against the engine mount, kick the starter for a fraction of a second, and it comes right lose! Yeay! I had even tried an impact wrench running at 125 psi and that hadn't worked. KWW Note: Not responsible for damages you might experience using this method... I encountered no problems. >I wanted to be sure I am not trying to loosen it the wrong way... it isn't >left hand threads, is it? 2.7 Litre V6. > > TIA |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.