Need advice - 2001 Elantra GT - auto transmission only uses 2nd and 3rd gear -

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Stanley P. Pickens - 02 Sep 2007 00:03 GMT

My tranny operates normally when the car is first driven for 20 mins to an
hour. Normally it will then be parked for 3-4 hours. When I start driving
then, the check engine light will come on soon after starting to move and
only 2nd and 3rd gears are available.

Dealer mechanic says it needs an "output sensor" to make it shift
correctly.

This happened breifly @ 6 months ago and the "input sensor" was installed
to fix it and it ran fine for 3-4 months.

Does this sound correct?

I am hoping to have the part installed also so the cruise control will
work again (the part is in but it has taken @ 9 months to get it - I was
told national back order ).

Signature

Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Reply to this Message

Matthew Fedder - 02 Sep 2007 10:48 GMT

I had both the transmission input and output sensors break on my '01
Elantra GLS, the output sensor at 80k and the input sensor at 100k.
That is definitely what it does (the transmission drops into a "fail
safe" mode so that no matter how fast you're driving it's not as
likely to damage the engine), although once it went bad, it would fail
right away. It was the freakiest thing the first time it happened.

I can't image having to wait 6 months to get the part, that's just
insane. It must have ruined your fuel economy!

Thankfully, if you can turn a socket wrench, it is a really easy
repair to do yourself (which, combined with the free online service
manual at www.hmaservice.com is a huge part of why I like Hyundai).
You just gotta remove the air intake box, and it's sitting right
there. (You can also then see that, when Hyundai got rid of the
external transmission fluid filter, they left much of the casting for
where it would be mounted in place. I find that kind of cute :) )

-Matthew

On Sep 1, 4:03 pm, "Stanley P. Pickens"
<jazzisjazz@nospamformebellsouthdotnet> wrote:

> My tranny operates normally when the car is first driven for 20 mins to an
> hour. Normally it will then be parked for 3-4 hours. When I start driving
[quoted text clipped - 12 lines]
> work again (the part is in but it has taken @ 9 months to get it - I was
> told national back order ).

Reply to this Message

TheDragon - 05 Sep 2007 15:09 GMT

>I had both the transmission input and output sensors break on my '01
> Elantra GLS, the output sensor at 80k and the input sensor at 100k.
[quoted text clipped - 15 lines]
>
> -Matthew

Is there a site to get the european version. I an in Cyprus and have a
SIngapore import, would love to get the manual for it.

Paul.

Reply to this Message

hyundaitech - 06 Sep 2007 17:19 GMT

I don't know of any. This vehicle is global, so you'll probably be able to
use the USA service information for a fair amount of things. These are the
typical differences I've seen between U.S. and non-U.S. vehciles:
-- Engine
-- Fuel management system
-- Creature-comfort options.

The primary thing to keep in mind is to pay attention. If your car
doesn't seem to be like what the service manual describes, you should
probably presume this is one of the differences.

--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html

Reply to this Message

TheDragon - 06 Sep 2007 17:51 GMT

>I don't know of any. This vehicle is global, so you'll probably be able to
> use the USA service information for a fair amount of things. These are
[quoted text clipped - 12 lines]
> http://www.talkaboutautos.com/group/alt.autos.hyundai/
> More information at http://www.talkaboutautos.com/faq.html

Thanks.

Reply to this Message

Matthew Fedder - 08 Sep 2007 10:35 GMT

> The primary thing to keep in mind is to pay attention. If your car
> doesn't seem to be like what the service manual describes, you should
> probably presume this is one of the differences.

You have to watch that even repairing the "correct" vehicle. I kind of
wish I had cataloged the discrepancies I've found :)

Reply to this Message

hyundaitech - 04 Sep 2007 18:12 GMT

Everything sounds correct except the 9 months for national back-order.
We've had them in stock at my place of employment continuously for about
the last 3 years.

--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html

Reply to this Message

Stanley P. Pickens - 04 Sep 2007 20:21 GMT

I'm sorry I wasn't clear. The part for the cruice control is here. The
mech just wanted to get the part in for the tranny so that both jobs could
be done at the same time thus saving me a trip.

> Everything sounds correct except the 9 months for national back-order.
> We've had them in stock at my place of employment continuously for about
> the last 3 years.

Reply to this Message

hyundaitech - 04 Sep 2007 21:55 GMT

That was my understanding, and I was referring to the output speed sensor
as being constantly in stock.

--
Message posted using http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at http://www.talkaboutautos.com/faq.html

Reply to this Message