Tranny Swap Chevy 2.8 to Isuzu 3.2 motor

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

billyjenni - 27 Nov 2005 17:53 GMT

I have a 93 Isuzu trooper with a 3.2 V6, motors good, also have an 85 S10
blazer, trannyand transfer case is good. Will they bolt up to my Isuzu
trooper 3.2 block?

Reply to this Message

electro punk - 29 Nov 2005 13:14 GMT

> I have a 93 Isuzu trooper with a 3.2 V6, motors good, also have an 85 S10
> blazer, trannyand transfer case is good. Will they bolt up to my Isuzu
> trooper 3.2 block?

I am going to be very interested in the replies that you get from
this posting, I have a 3.2 rodeo that I would like to put a different
engine in, but use my trans/transfer case, and dont have any idea
what will fit...

Reply to this Message

GreenGas - 02 Dec 2005 02:46 GMT

>> I have a 93 Isuzu trooper with a 3.2 V6, motors good, also have an
> 85 S10
[quoted text clipped - 6 lines]
> engine in, but use my trans/transfer case, and dont have any idea
> what will fit...

To my knowledge, nobody makes an adaptor kit for the 2nd or 3rd gen Isuzu
engines. I've looked everywhere and gone to the major adaptor vendors in the
US and Australia - no joy. The recommendation from them was to pull the
entire drivetrain - engine, transmission, and transfer case, and replace it
with a small block Chevy system out of a 4wd truck.

Not something I want to do.
r/
Steve

Reply to this Message