door lock button stuck

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

megabyte - 31 May 2006 14:29 GMT

I recently had to remove the front door panel on my 2000 Jeep Cherokee
sport to access the front speaker. After placing the panel back on,
the manual lock button is stuck in the "lock" position, with the door
actually unlocked - I cannot push the button to the unlocked position -
it physically won't move. I know there are rods back there that go to
the actual door lock, and I just can't figure out how to fix this...any
tips?

TIA
Eric.

Reply to this Message

Mike Romain - 31 May 2006 14:48 GMT

Usually that means the button got overextended in the wrong direction
and the rod is now bent like a spring holding it solid. You will have
to open it back up and make sure the button is in the same place as the
lock thinks it is when it goes back on.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pictures.html?id=2115147590
(More Off Road album links at bottom of the view page)

> I recently had to remove the front door panel on my 2000 Jeep Cherokee
> sport to access the front speaker. After placing the panel back on,
[quoted text clipped - 6 lines]
> TIA
> Eric.

Reply to this Message