 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Jeep / February 2007Dana 30
I may get a Dana 30 out of a 95YJ for my 91 YJ. Can I use the calipers from my 91 on the 95 axle? Also does the 95 have the larger TJ style axle ujoints? '95 is a YJ, so hypothetically it uses the same ujoints and calipers. I don't think they changed those between 91-95. I'm just guessing, though. Go to a parts website, look up the respective parts for the 91 and the 95 and see if the part #s match. > I may get a Dana 30 out of a 95YJ for my 91 YJ. > Can I use the calipers from my 91 on the 95 axle? > > Also does the 95 have the larger TJ style axle ujoints? > '95 is a YJ, so hypothetically it uses the same ujoints and calipers. I > don't think they changed those between 91-95. [quoted text clipped - 6 lines] > > > Also does the 95 have the larger TJ style axle ujoints? DOH! why did'nt I think of that? Part numbers won't match, the '95 has a slightly different vacmumn motor setup. Requires moving the wire from the switch on the firewall down to the switch on the axle. No big deal, just one of those irritating things. >>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I >>don't think they changed those between 91-95. [quoted text clipped - 8 lines] > > DOH! why did'nt I think of that? I did not have to do that... same hook-up on the vacuum disconnect as the 91 axle. "RoyJ" < wrote in message... > Part numbers won't match, the '95 has a slightly different vacmumn motor > setup. Requires moving the wire from the switch on the firewall down to [quoted text clipped - 12 lines] >> >> DOH! why did'nt I think of that? Hook up is the same, but you don't have the '4wd' light on the dash. > I did not have to do that... same hook-up on the vacuum disconnect as the 91 > axle. [quoted text clipped - 17 lines] >>> >>>DOH! why did'nt I think of that? Sure do... works fine. "RoyJ" wrote in message... > Hook up is the same, but you don't have the '4wd' light on the dash. > [quoted text clipped - 20 lines] >>>> >>>>DOH! why did'nt I think of that? The STOCK '91 and the STOCK '95 have different vacumn hookups and wiring. Whatever. > Sure do... works fine. > [quoted text clipped - 24 lines] >>>>> >>>>>DOH! why did'nt I think of that? > I did not have to do that... same hook-up on the vacuum disconnect as the 91 > axle. [quoted text clipped - 16 lines] > > >> DOH! why did'nt I think of that? I'm using my existing disco so it should just bolt right up with no wiring BS Not sure about the u-joints but the calipers will work. I just did this same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.  SignatureJimG 80' CJ-7 258 CID, HEI 4.56 Gears, Lock-Right F&R 35" BFG MT on 15x10 Centerlines D44 Rear, D30 Front. SOA Dana 300 w/4:1 & Currie twin sticks Warn X8000i w/ dual batteries 00' TJ Sport 4.0L, 5sp 4.56 Gears, TrueTrac rear 33" BFG AT on 15x8 Eagle Alloys D35 Rear, D30 Front. 3" Suspension Lift Warn X8000i "ufatbastehd" wrote in message... >I may get a Dana 30 out of a 95YJ for my 91 YJ. > Can I use the calipers from my 91 on the 95 axle? > > Also does the 95 have the larger TJ style axle ujoints? 95 they went to 297 Ujoints, 260 prior to that. > Not sure about the u-joints but the calipers will work. I just did this > same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears. [quoted text clipped - 3 lines] >> >> Also does the 95 have the larger TJ style axle ujoints? > Not sure about the u-joints but the calipers will work. I just did this > same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears. [quoted text clipped - 19 lines] > > > Also does the 95 have the larger TJ style axle ujoints? Thanks |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.