engine and tranny questions

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Big Tex - 14 Sep 2007 22:37 GMT

I have an 86 Grand Wagoneer that is trashed out but has a good 258 six in
it. I also have an 89 GW that is in good shape but the engine is blown.
What I need to know is this: will a 258 bolt up directly to a 627
Torqueflite tranny or do I need to buy an adapter for it?? The 89 has Dana
44 axles, if that makes a difference.

Thanks for any help

Reply to this Message

SnoMan - 15 Sep 2007 11:26 GMT

>I have an 86 Grand Wagoneer that is trashed out but has a good 258 six in
>it. I also have an 89 GW that is in good shape but the engine is blown.
[quoted text clipped - 3 lines]
>
>Thanks for any help

AMC has its own bellhousing bolt pattern so you need a 727 from
another AMC poweed vehicle, not just any 727. Since mid 70's, AMC has
used same bolt pattern on 6's and V8's. Also AMC used THM400's from
about 73 to 79 in all Jeeps with automatics. (AMC bolt pattern)
-----------------
TheSnoMan.com

Reply to this Message