2000 JGC Caliper Bolts

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

amoogk - 24 Jul 2003 18:51 GMT

Anyone know definitively what size hex key is required for these?

In the archives I've seen 7mm, 8mm, and 5/16" mentioned for other
years/models.
Don't have any of these sizes, and want to buy the right one.

Thanks,
Alan

Reply to this Message

Jerry Newton - 25 Jul 2003 01:46 GMT

Welp, I believe it is 5/16". You can take some comfort in knowing that
5/16" and 8mm are the same thing, so at least it narrows you down to two
choices. But I am reasonably certain that it is 5/16".

Jerry

> Anyone know definitively what size hex key is required for these?
>
[quoted text clipped - 4 lines]
> Thanks,
> Alan

Reply to this Message

amoogk - 31 Jul 2003 18:30 GMT

For the record, they are indeed 7mm.

For those that mentioned trouble finding this size, Home Depot carries a set
of 3/8" socket drive 4/5/6/7/8/10mm hex keys for CDN$20. Wal-Mart has a set
of 15 each SAE & Metric standard Allen Keys, including 7mm, for CDN$10, if
you don't care about torquing to spec.

...Alan

"amoogk" <amoogk@yahoo.ca> wrote in message news:...

> Anyone know definitively what size hex key is required for these?
>
[quoted text clipped - 4 lines]
> Thanks,
> Alan

Reply to this Message