 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Jeep / March 2004Ford motor in Cj7
I want install a 84 302 with the stock t150 trans and dana 20 in a 79 cj7. I need to know what year bellhousing to use. and what vehical it comes from. i know that the ford housing will bolt to the t150. any info would be great.....THANKS According to: http://www.quiknet.com/~ke6vut/gearchart.html The Borg Warner T-150 was only used in the '76-'79 Jeep, so that would mean it only fits an AMC. So it's off to: http://www.advanceadapters.com/ or: http://www.novak-adapt.com/ for you. God Bless America, ßill O|||||||O mailto:LWHughes3rd@aol.com http://www.billhughes.com/ > I want install a 84 302 with the stock t150 trans and dana 20 in a 79 cj7. > I need to know what year bellhousing to use. and what vehical it comes from. [quoted text clipped - 5 lines] > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.600 / Virus Database: 381 - Release Date: 2/28/04 You need the correct oil pan. Most 302s have the oil well forward. This will hit the front axil. You'll need one with the well back toward the flywheel from a Bronco or you can buy them new from Summit and others. The T-150 has the same bolt patterm as a T18 Ford truck transmission. I am getting ready to put a T18 where a T150 was this weekend. So, I would think a 302 bellhousing from a truck would work. The input shaft in a T150 is longer than a T18 (at least 1/2"). The best thing to do is email or call Novak. I have had good luck with getting advice from them. I hope some of this rambling helped. L.W.(ßill) Hughes III <billhughes@cox.net> wrote in message news:<4069E80D.2E8FDB73@cox.net>... > According to: http://www.quiknet.com/~ke6vut/gearchart.html The > Borg Warner T-150 was only used in the '76-'79 Jeep, so that would mean [quoted text clipped - 12 lines] > > Checked by AVG anti-virus system (http://www.grisoft.com). > > Version: 6.0.600 / Virus Database: 381 - Release Date: 2/28/04 Thanks for the input. I know about the oil pan and that I need a ford flywheel using ford clutch and pressure plate. I use the jeep release arm and bearing. It's not clear to me how the linkage will hook up. I have a 67 housing from a mustang. I believe its to small. I think once things are apart i'll see what I need. I already cheched Novak. they didn't state which housing. I'm also sold on the M.O.R.E. motor mounts. they bolt in place of the stockers. If need being..things could be put back to orig. Don 79cj7 98xj > You need the correct oil pan. Most 302s have the oil well forward. > This will hit the front axil. You'll need one with the well back [quoted text clipped - 7 lines] > > L.W.(?ill) Hughes III <billhughes@cox.net> wrote in message news:<4069E80D.2E8FDB73@cox.net>... > > According to: http://www.quiknet.com/~ke6vut/gearchart.html The > > Borg Warner T-150 was only used in the '76-'79 Jeep, so that would mean [quoted text clipped - 12 lines] > > > Checked by AVG anti-virus system (http://www.grisoft.com). > > > Version: 6.0.600 / Virus Database: 381 - Release Date: 2/28/04 I set up a linkage for a Mustang T5 in a CJ7. I used the stock CJ7 parts and flipped the bell crank arm to the top of the bell crank to make it a 'puller' instead of a 'pusher'. The Mustang bell housing is set up for the arm to pull to the front of the vehicle. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's > Thanks for the input. I know about the oil pan and that I need a ford > flywheel using ford clutch and pressure plate. I use the jeep release arm [quoted text clipped - 42 lines] > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.600 / Virus Database: 381 - Release Date: 2/28/04 http://www.bc4x4.com/chrisw/ "L.W.(ßill) Hughes III" wrote: > According to: http://www.quiknet.com/~ke6vut/gearchart.html The > Borg Warner T-150 was only used in the '76-'79 Jeep, so that would mean > it only fits an AMC. So it's off to: http://www.advanceadapters.com/ or: > http://www.novak-adapt.com/ for you. > God Bless America, ßill O|||||||O > mailto:LWHughes3rd@aol.com http://www.billhughes.com/ |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.