make sure the front hubs are operating. have your mechanic run it on a
lift. might be in bad need of lubrication.
the vacuum seals in the front drive hubs need to be replaced. common
problem if you haven't used the 4wd in a while. they dry up and the shaft
spline won't engage. you didn't say what year your sportage is. in the
98-99, they replace the hubs with a manual one that you have to get out
and turn by hand like a switch. In the 2000 and on the seal kit runs about
$40 and a couple hours labor.
helix - 09 Feb 2005 13:57 GMT
saw this on ebay this morning, might be what you are looking for to solve
your problem. highlight the entire paragraph and paste in your browser.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7953209583&ca
tegory=33728