 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Land Rover Cars / April 2006HF Radio
Has anyone on this NG installed a HF radio in a Disco S1? Did you come across any problems? Hi, I fitted a 29MH to mine, the hardest part was finding a decent place to mount it and the antenna, here is my solution after many other attempts It has caused no interferance problems to the car electrics. http://overland.co.za/upload/share/antena_mount.jpg http://overland.co.za/upload/share/radio_mount.jpg Regards Greg From: "Jeffrey S Austin" <jeffrey.austin@w8jsa.org> Subject: HF Radio | Has anyone on this NG installed a HF radio in a Disco S1? Did you come | across any problems? > Has anyone on this NG installed a HF radio in a Disco S1? Did you come > across any problems? > Hi, > [quoted text clipped - 18 lines] >>Has anyone on this NG installed a HF radio in a Disco S1? Did you come >>across any problems? My main concern was RFI. I think that I'll go with the new ICOM 7000 rig. The antenna I'll mount on the front bumper. >>>Has anyone on this NG installed a HF radio in a Disco S1? Did you come >>>across any problems? > > My main concern was RFI. I think that I'll go with the new ICOM 7000 > rig. The antenna I'll mount on the front bumper. My RRC has it's fair share of computers in it with EAS, memory seats, remote locking etc and I have had no problem running 100W HF through an ATAS120 mounted to the rear of the roof.. I think your main problem will be if you have a mismatch on the aerial and the RF travels down the screen of the coax. Make sure that the ground is well connected at the base of the aerial, mine has an alloy roof so to make sure that corrosion does not effect it I have run copper ground wires under the roof as well. Tony, G8XFP >>>>Has anyone on this NG installed a HF radio in a Disco S1? Did you come >>>>across any problems? [quoted text clipped - 12 lines] > Tony, > G8XFP G8XFP DE W8JSA The plan is to put a winch mountabtle bumper which will give me a good base. The antenna will be either a High Sierra Screwdriver or a Moonraker. >Has anyone on this NG installed a HF radio in a Disco S1? Did you come >across any problems? Pretty straight forward. Easy to get power cables in from engine bay etc. I made a small ali mount that poked out just above the head lamp for the antenna. It was not my intention to use HF mobile though.  SignatureMarc Draper > Has anyone on this NG installed a HF radio in a Disco S1? Did you come > across any problems? On the Rangie the aerial was the problem. On a saloon I used a bumper mount but the bodywork is vertical all round on my Rangie and a Disco must be worse. The loading is peaky as can be and I get the feeling it has lots of nulls. On a VHF/UHF rig it's easier but car parks are a menace and I ended up putting a small mag mount just over the rear door and accepting that when I forget it's going to be hanging nicely in view in the interior mirror. I anticipated problems at 100W pep but the computers were good as gold. It's other times when they mess me about. Franky I discovered that I didn't use it enough and it's currently in a box in the workshop awaiting a less stress instalation. nigelH G8JFT > Has anyone on this NG installed a HF radio in a Disco S1? Did you come > across any problems? Fitted an FT857 in my RR Classic. The rig sits where the CD changer should be using the rmote head placed under the front cup holders and the aerial is placed at the rear on the roof. Tony, G8XFP >Has anyone on this NG installed a HF radio in a Disco S1? Did you come >across any problems? hi on my rangie i have mounted the airle on the left side of the bull bar dose not seem to be a problem |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.