1986 90 Exhaust

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Bob Hobden - 05 Apr 2006 17:27 GMT

There is a broken bracket and"D" fixing (around the pipe) loose on the front
pipe of my 1986 90 2.5 petrol, where is it supposed to fit on the
engine/chassis? I can't see for looking.
Anyone got an exploded view of same exhaust they could mail me?
The exhaust comes in 4 parts if that helps.

Signature

Regards
Bob
"Never get so busy making a living
that you forget to make a life"

Reply to this Message

Oily - 05 Apr 2006 20:53 GMT

> There is a broken bracket and"D" fixing (around the pipe) loose on the front
> pipe of my 1986 90 2.5 petrol, where is it supposed to fit on the
> engine/chassis? I can't see for looking.
> Anyone got an exploded view of same exhaust they could mail me?
> The exhaust comes in 4 parts if that helps.

I seem to remember repairing one of these a few years ago on an '84 petrol
110" and I think it is bolted directly to the block in the middle behind the
engine mounting about 2" above the top of the sump joint and fastened by a
10mm bolt (17mm head).

HTH Martin

Reply to this Message

Bob Hobden - 05 Apr 2006 23:21 GMT

Martin wrote after...

> "Bob Hobden" asked...
>> There is a broken bracket and"D" fixing (around the pipe) loose on the
[quoted text clipped - 9 lines]
> engine mounting about 2" above the top of the sump joint and fastened by a
> 10mm bolt (17mm head).

Thanks, I'll take another look tomorrow then it will be a case of hunt the
correct bracket or make one.

Signature

Regards
Bob Hobden
17mls W. of London.UK

Reply to this Message

Dougal - 05 Apr 2006 23:26 GMT

> Martin wrote after...
>
[quoted text clipped - 17 lines]
> Thanks, I'll take another look tomorrow then it will be a case of hunt the
> correct bracket or make one.

Bob

Give me somewhere to send an e-mail with an Acrobat attachment. My
e-mail address works after the obvious change.

Reply to this Message