Mantec Wheel Carrier....Ping Richard

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Jon - 03 May 2006 11:49 GMT

Hi all,

I have a Mantec Wheel carrier currently sat on my 200Tdi. Will it fit
onto my TD5 90?

The TD5 is a 2000 Model and has the 2 part (original style) rear door.
I am aware that the crossmember is different though but arent sure if
the carrier will bolt straight to it?

Anyone know?

Thanks
Jon

Reply to this Message

Lee_D - 03 May 2006 15:50 GMT

Jon <nospam@nospam.com> uttered summat worrerz funny about:

> Hi all,
>
[quoted text clipped - 9 lines]
> Thanks
> Jon

Jon can't help but would hazard a wild guess it would fit.

While your pinging Richard wonder if he can recommend anywher local I can
get lengths of steel cut , say the height of the chassis at it's deepest
(IIa). The idea being to buy some strips for the work on Percy to save
having to buy a whole sheet, this would also cut down on the amount of
plasmering I need to do and make it easy to transport.

Lee

Reply to this Message

beamendsltd - 03 May 2006 17:55 GMT

> Hi all,
>
[quoted text clipped - 9 lines]
> Thanks
> Jon

As far as I know it should fit ok.

Richard

Signature

www.beamends-lrspares.co.uk sales@beamends-lrspares.co.uk
RISC-OS - Where have all the good guys gone?
Boycott the Yorkshire Dales - No Play, No Pay

Reply to this Message

Jon - 04 May 2006 08:21 GMT

>> Hi all,
>>
[quoted text clipped - 13 lines]
>
>Richard

Thanks Richard, I had a quick peek last night and I suspect you are
right, the bolt holes in the cross memeber look about right.

Thanks
Jon

Reply to this Message