Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Land Rover Cars / May 2006

Tip: Looking for answers? Try searching our database.

I'm foolish, and I think the V8 might have paid...

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Pete M - 04 May 2006 03:54 GMT
...a large price.

<The Story So Far>

A few weeks back I bought a Range Rover EFi off ebay. It hadn't been on the
road for a couple of years but ran well, needed an exhaust, the LPG system
fixing, a few bits of trim here and there, in all a cheap but solid Rangie
for a sensible price. Drove it home - 290 miles, that was interesting. Thank
the lord for borrowed tradeplates... /ahem/

Gave it a good wash, checked everything was ok, oil was clean and to the
right level, antifreeze was ok, no leaks!, took it for an MOT, which one set
of wiper blades and a full exhaust later, it passed. Which was nice.

Taxed it on Tuesday morning, checked the levels again, all lovely, so I
fitted it with the bits I need in daily life, radio, phone, that kind of
stuff, found all the bits of trim - fuse box cover, door pocket, fixed the
headlining droop, found a new top tailgate and a cheap way of fixing the
central locking and happily mooched about all day.

Today I used it as my daily motor, drives well.. but tonight as I started it
I heard something not so nice, something that reminded me that despite
checking the oil daily I hadn't actually changed it yet, and that it used to
be run on LPG... which doesn't leave much crap in the oil, which means the
oil tends to stay clear for longer..... even when it's probably 3 years
old.. in a 175k mile engine... which brings me in a long winded way to my
point..

*the bit that matters is below this*

It's now got a light bottom end growl when cold at around 2800 rpm. No sign
of the oil pressure light coming on though, which I suspect means I've
knackered the big end bearings at the very least.

Will I get away with an oil flush, and filter change using decent oil? All
will be revealed later today.

Signature

Pete M - The Corporate Penguin.
Range Rover Vogue EFI,
Porsche 911 Carrera  3.2 *For Sale*
OMF#9

"This is not 'Nam, this is bowling. There are rules"

Uncle Geoff - 04 May 2006 13:41 GMT
Hi

Could be the gearbox mainshaft bearing. As I recall,Big ends tend to knock
rather than growl which is more like a roller bearing under pressure.

Regards

Geoff

> ...a large price.
>
[quoted text clipped - 32 lines]
> Will I get away with an oil flush, and filter change using decent oil? All
> will be revealed later today.
Pete M - 04 May 2006 18:45 GMT
>> ...a large price.

>> *the bit that matters is below this*
>>
[quoted text clipped - 4 lines]
>> Will I get away with an oil flush, and filter change using decent
>> oil? All will be revealed later today.

> Hi
>
[quoted text clipped - 5 lines]
>
> Geoff

Cheers Geoff, does that still account for Autos though??

Anyway, I changed the oil today, flushed it all, nice proper oil in it and
it's a lot quieter now. It'll still growl if blipped with no load on, so I
suspect it's the little ends. I'm probably wrong..

Signature

Pete M - The Corporate Penguin.
Range Rover Vogue EFI,
Porsche 911 Carrera  3.2 *For Sale*
OMF#9

"This is not 'Nam, this is bowling. There are rules"

R L driver - 04 May 2006 19:16 GMT
>  > "Pete M" <pete.murray@bogoffwithzepressedmeatblueyonder.co.uk> wrote
>>> ...a large price.
[quoted text clipped - 23 lines]
> it's a lot quieter now. It'll still growl if blipped with no load on, so I
> suspect it's the little ends. I'm probably wrong..

Maybe its the hydraulic lifters , they dont like old oil.
Steve the grease
EMB - 04 May 2006 21:39 GMT
>>Could be the gearbox mainshaft bearing. As I recall,Big ends tend to
>>knock rather than growl which is more like a roller bearing under
[quoted text clipped - 9 lines]
> it's a lot quieter now. It'll still growl if blipped with no load on, so I
> suspect it's the little ends. I'm probably wrong..

Auto box low on oil and you're hearing the pump cavitate as it sucks
air?  Or low power steer fluid causing the same to happen with it's pump?

Signature

EMB

Pete M - 05 May 2006 00:17 GMT
>>> Could be the gearbox mainshaft bearing. As I recall,Big ends tend to
>>> knock rather than growl which is more like a roller bearing under
[quoted text clipped - 13 lines]
> air?  Or low power steer fluid causing the same to happen with it's
> pump?

Both levels are fine, strangely enough.

I suspect I could be one of the few people to have owned many Range Rover
Classics yet never had a leaky power steering system yet...

Someone's comment earlier about it possibly being the cam could well be
right, although it runs very sweetly it is down on power compared to most
Range Rovers I've owned. No smoke or anything from it, and the CO and HC
levels are both fine, although the CO is a little high - 2.5%

Signature

Pete M - The Corporate Penguin.
Range Rover Vogue EFI,
Porsche 911 Carrera  3.2 *For Sale*
OMF#9

"This is not 'Nam, this is bowling. There are rules"

 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.