How big is an FTC1692?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Tim Jones - 24 Mar 2007 11:35 GMT

Help I'm just about to em=bark on a weekend project to replace the
roll pins in thje clutch release arm on a P38. The problem is that
no-one seems to carry this small opart in stock.

It should be relativley simple to buy two from a local factor if only
I knew how big they are. So can anyone offer any idea of their size so
i can pick a couple up before everyone closes this afternoon.

Regards

Tim Jones

Reply to this Message

beamendsltd - 24 Mar 2007 12:52 GMT

> Help I'm just about to em=bark on a weekend project to replace the
> roll pins in thje clutch release arm on a P38. The problem is that
> no-one seems to carry this small opart in stock.

Ahem....

FTC1692 Scroll Pin - Release Lever - Defender 5-Cylinder - R380
52p inc VAT

the price will appear on tonights update, the part is at:

http://www.beamends-lrspares.co.uk/BeamEnds/Defender/Gearbox/R380/ClutchRelease/
6-Clyinder/index.html

> It should be relativley simple to buy two from a local factor if only
> I knew how big they are. So can anyone offer any idea of their size so
[quoted text clipped - 3 lines]
>
> Tim Jones

Richard

Signature

www.beamends-lrspares.co.uk sales@beamends-lrspares.co.uk
I have become... comfortably numb

Reply to this Message

Tim Jones - 24 Mar 2007 14:26 GMT

>> Help I'm just about to em=bark on a weekend project to replace the
>> roll pins in thje clutch release arm on a P38. The problem is that
[quoted text clipped - 8 lines]
>
>http://www.beamends-lrspares.co.uk/BeamEnds/Defender/Gearbox/R380/ClutchRelease/
6-Clyinder/index.html

I'll accept that you may be the one person who has it in stock ;)

BUT sadly unless you can get a carrier to deliver 2 to me by luchtime
on Sunday, I'll still need to go and and buy one from someone local
this PM. Hence the need to know their size to aleviate the need to
buy two of every rollpin onm the shelf.

Regards

Reply to this Message

Tim Jones - 27 Mar 2007 12:44 GMT

>Help I'm just about to em=bark on a weekend project to replace the
>roll pins in thje clutch release arm on a P38. The problem is that
[quoted text clipped - 3 lines]
>I knew how big they are. So can anyone offer any idea of their size so
>i can pick a couple up before everyone closes this afternoon.

Having found the answer I'll record it here. Maybe someone else will
find it useful, maybe it'll be me in 5 years time ;)

The holes measure M5 x approximately 30mm.

Reply to this Message