Any kind soul with a SIlI manual please?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

T i m - 30 Sep 2004 10:03 GMT

Hi All,

It was mentioned here that some of the manuals show measurements from
various points on the chassis and I would like to help a mate who is
rebuilding his first Landy, get the bulkhead back on square?

He noticed when he first drove it home that the doors had different
gaps between the rear of the door and the main tub?

He has replaced one front outrigger back in it's proper place but the
other has been replaced before and not where it should be?

Anyone have any dimensions that might help him get it right please (I
think it's a 109)

All the best ..

T i m

Reply to this Message

beamendsltd - 30 Sep 2004 13:07 GMT

> Hi All,
>
[quoted text clipped - 14 lines]
>
> T i m

On a 109, the fromt face of the bulkhead outrigger is 48.58 inches
from the front of the front spring hangar (measured horizontally)
- it seems......

Richard

Signature

www.beamends-lrspares.co.uk sales@beamends-lrspares.co.uk
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Helping keep Land Rovers on and off the road to annoy the Lib Dems

Reply to this Message

Andrew Renshaw - 30 Sep 2004 16:09 GMT

Hi TIm ,

Mail me off list I have the 350 page Land Rover Manual on disk.

andrew"at" preaching.co.uk

You can guess that you take out and put in.

A

> Hi All,
>
[quoted text clipped - 14 lines]
>
> T i m

Reply to this Message

Dougal - 30 Sep 2004 19:23 GMT

> Hi TIm ,
>
> Mail me off list I have the 350 page Land Rover Manual on disk.

Alternatively, as we already know the Series III manual is here ...

http://www.landrover.ee/est/varia/downloads/cars.htm

with the frame dimensions being here...

http://www.landrover.ee/est/files/manuals/cars/sIII/SIII_ROM_Part_6.pdf

There are some minor differences if we are talking about Series II/IIA -
if it's those that you need contact me.

David

Reply to this Message

T i m - 01 Oct 2004 00:44 GMT

>> Hi TIm ,
>>
[quoted text clipped - 12 lines]
>
>David

Hi and thanks to all that replied ..

<cough> time to give the broadband a hammering methinks <mutter> ;-)

All the best ..

T i m

Reply to this Message