Remote Bleed Nipples...

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

David_LLAMA4x4 - 06 Oct 2004 19:55 GMT

A recent thread raised the question of having a remote bleed nipple on a
clutch cylinder making access to it far easier than crawling inderneath....

Yesterday I raided a few tote bine for a few fittings and made one:
The kit comprises:

A selection of adaptors to suit most thread sizes in the slave cylinders.
A stainless braid hose 75cm long with fittings swaged on Length can be
varied to order.
A bleed nipple assembly of a F3000 car that mounts through a 10mm hole.

The kit cost is ?26 plus carriage.

Phone 01938.850382 or email if you are interested.

David
LLAMA 4x4
www.llama4x4.co.uk

Reply to this Message

Simon Barr - 07 Oct 2004 09:08 GMT

> The kit cost is £26 plus carriage.

Having got an armfull of hydraulic fluid changing/bleeding my slave cylinder
a while back I may be interested!

Is that VAT inclusive and how much would carriage be?

Signature

simon at sbarr dot demon dot co dot uk
Simon Barr.
'97 110 300Tdi.

Reply to this Message

David_LLAMA4x4 - 08 Oct 2004 05:13 GMT

> > The kit cost is ?26 plus carriage.
>
> Having got an armfull of hydraulic fluid changing/bleeding my slave cylinder
> a while back I may be interested!
>
> Is that VAT inclusive and how much would carriage be?

There is no VAT to add.....
Carriage would be ?4.50 for overnight, insured delivery to any UK mainland
address....

David
LLAMA 4x4
www.llama4x4.co.uk
.

Reply to this Message

Simon Barr - 08 Oct 2004 08:49 GMT

> There is no VAT to add.....
> Carriage would be £4.50 for overnight, insured delivery to any UK mainland
> address....

Cheers. Although it's a good idea and a bit flash I may not bother after
all, sorry. I thought about how often I would actually need to bleed it
and came to the conclusion that it's worth putting up with the small
amount of aggro involved.

Ta anyway.

Signature

simon at sbarr dot demon dot co dot uk
Simon Barr.
'97 110 300Tdi.

Reply to this Message