Range ZP same as Disco??

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

fanie - 07 Oct 2004 06:50 GMT

Hi I have made a couple of posts on the subject of a ZF 4speed as fitted to
my 96 300tdi disco.

Richard Savage has been pretty helpful re info on the zf 4speed as fitted to
his RaRo. My question is how similar are these boxes as I have just found
the WS mannual for the RaRo box on the web and thought this might prove
useful, or not?

Regards
Stephen

Reply to this Message

Austin Shackles - 07 Oct 2004 07:35 GMT

>Hi I have made a couple of posts on the subject of a ZF 4speed as fitted to
>my 96 300tdi disco.
[quoted text clipped - 3 lines]
>the WS mannual for the RaRo box on the web and thought this might prove
>useful, or not?

manual? where??

Reply to this Message

fanie - 07 Oct 2004 10:19 GMT

http://www.landrover.ee/est/varia/downloads/cars.htm

The usual place for all things LR.

Regards

Stephen

> >Hi I have made a couple of posts on the subject of a ZF 4speed as fitted to
> >my 96 300tdi disco.
[quoted text clipped - 5 lines]
>
> manual? where??

Reply to this Message

Austin Shackles - 07 Oct 2004 12:17 GMT

>http://www.landrover.ee/est/varia/downloads/cars.htm
>
>The usual place for all things LR.

coo, new stuff. it's a while since I looked at the site.

Reply to this Message

Pantelis Giamarellos - 07 Oct 2004 08:29 GMT

RaRo Classic and Discovery series 1 used the same one.
Different variations existed between the diesel and the petrol engined
vehicles eventhough it known that a ZF from a petrol engined car can be
mated and work properly on a diesel engined vehicle.

Take care
Pantelis

P.S. The only RaRo that uses an upgraded ZF autobox is the P38A 4.6 engined
RaRo from 1995 up to 2002

> Hi I have made a couple of posts on the subject of a ZF 4speed as fitted to
> my 96 300tdi disco.
[quoted text clipped - 6 lines]
> Regards
> Stephen

Reply to this Message

fanie - 07 Oct 2004 10:23 GMT

Thanks, Mine is the diesel so hopefully the setting are not too different

Regards
Stephen

Reply to this Message