 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Land Rover Cars / April 2005Repair panels for bulkhead on 110
Not bad, but could do with sorting above the hinge area. Is there any kind of panel etc. It's not on the hinge bit & I think that's the only bit that's going (Am I right Mark?) Nige  SignatureSubaru WRX (Annabel) Landrover 110 County Station Wagon (Tyson) (soon) '"They called him Jimmy the gent" >Not bad, but could do with sorting above the hinge area. Is there any kind of panel etc. It's not on the >hinge bit & I think that's the only bit that's going (Am I right Mark?) [quoted text clipped - 7 lines] > >'"They called him Jimmy the gent" yea, as seen on the photos, I was going to have a couple of repair panels, seen them on ebay and replace the whole section including the top hinge. I'll give them a good hard poke with a screwdriver in the morning and be sure it's solid up to the hinges though it looks ok. Regards. Mark. Signature_________________________________________ 1984 110 CSW 2.5(na)D (3,000 rivets flying in close formation) www.4x4info.info www.mvp-fine-art.co.uk www.markvarleyphoto.co.uk charity calendar project - http://www.4x4info.info/calendar/ _________________________________________ >>Not bad, but could do with sorting above the hinge area. Is there any kind of panel etc. It's not on the >>hinge bit & I think that's the only bit that's going (Am I right Mark?) [quoted text clipped - 16 lines] >Regards. >Mark. Yea you could patch-it with not much trouble, or repair sections. I looked on ebay where I'd seen them often before but could see none. I think I've seen them in simmonites magazine ads. Regards. Mark. Signature_________________________________________ 1984 110 CSW 2.5(na)D (3,000 rivets flying in close formation) www.4x4info.info www.mvp-fine-art.co.uk www.markvarleyphoto.co.uk charity calendar project - http://www.4x4info.info/calendar/ _________________________________________ > >>Not bad, but could do with sorting above the hinge area. Is there any kind of panel etc. It's not on the > >>hinge bit & I think that's the only bit that's going (Am I right Mark?) [quoted text clipped - 23 lines] > Regards. > Mark. <shameless plug> Bulkhead Top Corner Repair Panel LH £14.10 Bulkhead Top Corner Repair Panel RH £14.10 </shameless plug> Richard Signaturewww.beamends-lrspares.co.uk sales@beamends-lrspares.co.uk Running a business in a Microsoft free environment - it can be done Powered by Risc-OS - you won't get a virus from us!! Helping keep Land Rovers on and off the road to annoy the Lib Dems >>>> Not bad, but could do with sorting above the hinge area. Is there >>>> any kind of panel etc. It's not on the hinge bit & I think that's [quoted text clipped - 33 lines] > > Richard I'll have a couple of those next month then mate! Nige SignatureSubaru WRX (Annabel) Landrover 110 County Station Wagon (Tyson) '"They called him Jimmy the gent" >> >>Not bad, but could do with sorting above the hinge area. Is there any kind of panel etc. It's not on the >> >>hinge bit & I think that's the only bit that's going (Am I right Mark?) [quoted text clipped - 32 lines] > >Richard helluvalot cheaper than the ones I saw on ebay (£40 a pair plus postage) and £39.95 a pair from simmonites. Regards. Mark. Signature_________________________________________ 1984 110 CSW 2.5(na)D (3,000 rivets flying in close formation) www.4x4info.info www.mvp-fine-art.co.uk www.markvarleyphoto.co.uk charity calendar project - http://www.4x4info.info/calendar/ _________________________________________ >>> >>Not bad, but could do with sorting above the hinge area. Is there any >>> >>kind of panel etc. It's not on the [quoted text clipped - 37 lines] > helluvalot cheaper than the ones I saw on ebay (£40 a pair plus > postage) and £39.95 a pair from simmonites. Well, David Simmonite has to pay his court costs when he gets out of prison!! ;~) Nige > Regards. > Mark. >>><shameless plug> >>> [quoted text clipped - 12 lines] > >Nige seems you know something I don't then... hey ho. Regards. Mark. Signature_________________________________________ 1984 110 CSW 2.5(na)D (3,000 rivets flying in close formation) www.4x4info.info www.mvp-fine-art.co.uk www.markvarleyphoto.co.uk charity calendar project - http://www.4x4info.info/calendar/ _________________________________________ > >> >>Not bad, but could do with sorting above the hinge area. Is there any kind of panel etc. It's not on the > >> >>hinge bit & I think that's the only bit that's going (Am I right Mark?) [quoted text clipped - 38 lines] > Regards. > Mark. :-) Richard Signaturewww.beamends-lrspares.co.uk sales@beamends-lrspares.co.uk Running a business in a Microsoft free environment - it can be done Powered by Risc-OS - you won't get a virus from us!! Helping keep Land Rovers on and off the road to annoy the Lib Dems > Not bad, but could do with sorting above the hinge area. Is there any kind > of panel etc. It's not on the hinge bit & I think that's the only bit > that's going (Am I right Mark?) > > Nige I've not got the pannel but feast your eyes on the repair procedure :o) http://www.lrproject.com/jlo/index.html Under footwells and door pillars sections Lee D > Not bad, but could do with sorting above the hinge area. Is there any kind of panel etc. It's not on the > hinge bit & I think that's the only bit that's going (Am I right Mark?) u can't beat fitting a new bulkhead, mine was full of filler, rot, silicone and blobby welding so I replaced it with a reasonable waxoyed one. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.