Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Land Rover Cars / November 2005

Tip: Looking for answers? Try searching our database.

RR 4.6 HSE key fob...beware!

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Alun P - 26 Nov 2005 11:05 GMT
A tale of woe...remote fob No 1 showed as low battery on dash display so I
used No 2 fob. No2 fob failed yesterday ;leaving me with engine immobilised
and EKA 30 miles away at home! having got the code I am now using the key.
Not too much of an issue.

Went to my local LR dealer to sort out batteries for fobs etc and I was told
that if you leave a key fob with a flat battery it becomes useless and will
not work again, even if you put new batteries in it!!!!!!!!!(where does it
say that in the hand book????)

So, I now have two knackered fobs.

Ok, so I have to order a new fob, but as they are made with the key, I have
to produce V5 and other ID...not an issue but.....£126 each for the fobs and
a 5 week, YES FIVE weeks wait!!!!!

Wow, don't you just love customer service?????

AlunP
TonyB - 26 Nov 2005 16:13 GMT
> A tale of woe...remote fob No 1 showed as low battery on dash display so I
> used No 2 fob. No2 fob failed yesterday ;leaving me with engine immobilised
[quoted text clipped - 13 lines]
>
> Wow, don't you just love customer service?????

That's it. The world has finally gone completely mad. £252 to get into your
motor? ( Plus vat I expect?)

Brother had a similar tale of woe yesterday on his ancient  Cavalier ( value
£500 on a good day). Failed MOT on a slightly sticking hazard light warning
switch which cost £40 plus a fiver to fit plus vat on the lot. He's really
annoyed because it worked fine if you jer...jer... jiggled it a bit and he's
never used it in the two years he's had the motor!!!
TonyB
Pete M - 27 Nov 2005 19:16 GMT
In news:dma1ji$448$1@nwrdmz02.dmz.ncs.ea.ibs-infra.bt.com,
TonyB <Norfolk@soxclara.co.uk> decided to enlighten our sheltered souls with
a rant as follows
>> A tale of woe...remote fob No 1 showed as low battery on dash
>> display so I used No 2 fob. No2 fob failed yesterday ;leaving me
[quoted text clipped - 16 lines]
> That's it. The world has finally gone completely mad. £252 to get
> into your motor? ( Plus vat I expect?)

That's cheap that is... well, sort of.

To fix the remote central locking on my old Alfa 155 costs £800 because of
Fiats insane security system.

One of the previous keepers managed to lose the all important "brown" key,
which reprogrammes everything, they also lost a little key which happens to
operate the alarm master switch. The "brown" key isn't an issue because most
locksmiths can clone the key I've got, and the Alfa doesn't know it's been
cloned. However, to make the little alarm plipper in the key work you need a
special code, and the little key for the alarm master switch. Alfa refuse to
give you the code, and won't sell the master switch separately - which means
buying an alarm unit, engine ecu, lockset, alarm receiver unit and a couple
of other bits.

I think I'll suffer with turning the key in the door lock.

Signature

Pete M

Alfa 155
Ford Capri (still broked)
Porsche 911 3.2 (For Sale - ebay soon)
COSOC #5, OMF#9
Scouse Git extraordinaire. Liverpool, Great Britain

Tim Hobbs - 28 Nov 2005 00:37 GMT
>Alfa refuse to
>give you the code, and won't sell the master switch separately - which means
>buying an alarm unit, engine ecu, lockset, alarm receiver unit and a couple
>of other bits.
>
>I think I'll suffer with turning the key in the door lock.

Based on my experience with Alfas the key battery would outlast most
of the items you list above anyway... :(
Signature

Tim Hobbs

Peter R. - 27 Nov 2005 10:49 GMT
>A tale of woe...remote fob No 1 showed as low battery on dash display so I
>used No 2 fob. No2 fob failed yesterday ;leaving me with engine immobilised
[quoted text clipped - 15 lines]
>
>AlunP
Utter bollox. The remote symply has to be resynchronized. The
procedure is in the Workshop manual under code S3 : Security/Central
locking.
Just show them the procedure AFTER you get the new keys, refuse to pay
and b*gg*r of. They deserve no better trying to rip you off.

Peter R,
Mark Dickinson - 27 Nov 2005 10:52 GMT
> A tale of woe...remote fob No 1 showed as low battery on dash display so I
> used No 2 fob. No2 fob failed yesterday ;leaving me with engine
[quoted text clipped - 15 lines]
>
> AlunP
Have you tried resyncing the key?
Start with the car unlocked.
Put key in drivers door lock and turn to lock position at the same time as
you press the lock button on your keyfob?

I've never heard of a flat battery killing a fob, as long as the LED is
flashing when you press the button there is normally a chance of getting
the car and key to talk, even if it needs to go on TestBook.
Mark
Signature

Nothing is more precious than Independence and Liberty

 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.