Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Mazda / Mazda Miata / September 2004

Tip: Looking for answers? Try searching our database.

Spark plug in oil + knocking/clicking noise

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Tingfang Ji - 03 Sep 2004 16:30 GMT
My 95 Miata had a knocking sound last year, which went away after  a
major tune up. Recently the knocking sound came back. The clicking
sound also becomes faster as the engine speed increases.

The engine oil turned out to be half empty (<2 quarters left in 3
months). There was some leak on the body of the engin.

One of the spark plugs (no. 4 at the back) is soaked in oil (plug
body). After changing the spark plug, the noise still persists.

The spark plug wires were changed last year.

Is it possible that the spark plug wires went back again (as indicated
in the following link)? Is the valve gasket leaking?

http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&threadm=9cgr6i%24r3g%241%40sl
b7.atl.mindspring.net&rnum=7&prev=/groups%3Fq%3Dspark%2520plug%2520oil%2520noise
%26hl%3Den%26lr%3D%26ie%3DUTF-8%26sa%3DN%26tab%3Dwg


I would appreciate any advices and estimate on how difficult is the
job.

Thanks,
Tingfang
merle - 05 Sep 2004 17:24 GMT
> Is it possible that the spark plug wires went back again (as indicated
> in the following link)? Is the valve gasket leaking?

The valve cover gasket, a $30 part,  is probably leaking. If you have
the right tools and ability, it is not difficult to replace. There is
also a 50 cent o-ring on what Mazda calls "crank position sensor" and
some of us call "cam angle sensor" that should be changed when the
valve cover is off. You will need to know how to set ignition timing
if you change this. Most miata hobbyists can change both in an
evening, working slow.

Anyway, tell the shop you want the valve cover gasket and CAS o-ring
changed and it's probably a $200 job. Tell them you want an oil leak
fixed and it's at least a $500 job. That's the way it works.

The noise could be the "clatter" common to miata engines. It gets
worse when you run low on oil. Change the oil and it should go away.
Tingfang Ji - 08 Sep 2004 06:17 GMT
Thanks for the info. The noise went away after I changed oil and spark
plugs and a couple miles of warmup run. I'll try to read up some more
posts and fix the valve cover. I'll keep this group posted.

Again, thanks for the information.

Tingfang

> > Is it possible that the spark plug wires went back again (as indicated
> > in the following link)? Is the valve gasket leaking?
[quoted text clipped - 13 lines]
> The noise could be the "clatter" common to miata engines. It gets
> worse when you run low on oil. Change the oil and it should go away.
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.