note: there are different products to use to restore/protect vinyl tops and
fabric tops. the below applies to either but be sure you get the correct
product for your type of top.
my understanding is that virtually all fabric auto tops are made from a
fabric from a company called haartz. sunbrella is another company that
makes fabric for tops but they are generally found on marine products (boat
covers, bimini tops, etc) and on window awnings. haartz had recommended a
product called 303 high tech fabric guard for over 25 years, but in recent
years has recommended a different product called raggtopp. i used the
raggtopp product on my aftermarket haartz fabric (not vinyl) top (95 na) a
couple of years ago and after a bad start the results were spectacular. the
first time i used raggtop the top had a white streaking to it that looked
awful. this came off with another cleaning with the top cleaner. i was
told to hold the spray further away from the top (two feet or so) and let
the spray rain down on the top. results were great, the color which was
not in bad shape was restored to like new and the top beaded rain again like
when new. next time i tried raggtopp, about a year and half later, it was
a disaster. the product is in a aerosol can and they did something to the
nozzle that had resulted in a mist so fine that it is now impossible to
apply the product outdoors as the slightest wind carries the spray off
before it ever touches the top. even after moving indoors and applying a
couple of coats they did not bead like the first year. i exchange some
emails with the company and all i will say is that they were less than
professional in their responses (like their web site). i then discovered
303 high tech fabric guard and gave it a try. it comes in a manual pump
spray bottle and is easy to control. the product works great. in my
experience, raggtopp may have produced better results in terms of beading
the first time i used it (before they changed it), but it was effectively
useless when i last tried it. 303 is much less fussy and very easy to
apply, even if outdoors. make sure your top is bone dry before you apply
either of these products, and that it is allowed to bask in a hot sun for
several hours before the top comes into contact with any water for the first
time (allow the product to dry completely, not just to the touch).
these are the manufacturers sites...
www.303products.com
http://www.wolfsteins.com
>>you didn't see the novel i wrote for you for days ago?
>>
[quoted text clipped - 24 lines]
>
> I welcome you to Crackerbox Palace.
OzOne - 04 May 2008 01:08 GMT
>note: there are different products to use to restore/protect vinyl tops and
>fabric tops. the below applies to either but be sure you get the correct
[quoted text clipped - 32 lines]
>www.303products.com
>http://www.wolfsteins.com
Thanks Chris,
Sounds like a good product...now to see if I can get it here in Oz or
if I need to import.
OzOne of the three twins
I welcome you to Crackerbox Palace.