Mazda 6 outlets

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

MG - 10 Mar 2007 02:19 GMT

Is there any reasonable way (short of totally rewiring) to wire the power
outlets in a 6 so they stay on when the key is removed? Anyone done this
mod?

mg

Signature

Posted via a free Usenet account from http://www.teranews.com

Reply to this Message

Hachiroku ハチロク - 13 Mar 2007 04:25 GMT

> Is there any reasonable way (short of totally rewiring) to wire the power
> outlets in a 6 so they stay on when the key is removed? Anyone done this
> mod?
>
> mg

I don't think so.

Find a hot fuse in the fuse block with a large enough capacity, tap in
with a fused lead, and replace the hot wire to one or more of the outlets
(I'd stay to one...) removing the original hot wire and replacing it with
your new wire.

Reply to this Message

MG - 14 Mar 2007 16:57 GMT

>> Is there any reasonable way (short of totally rewiring) to wire the power
>> outlets in a 6 so they stay on when the key is removed? Anyone done this
[quoted text clipped - 8 lines]
> (I'd stay to one...) removing the original hot wire and replacing it with
> your new wire.

That's kind of further than I was hopng to have to go, but thanks.

Signature

Posted via a free Usenet account from http://www.teranews.com

Reply to this Message