Rim sizes

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Rick - 31 Jan 2004 01:23 GMT

Hi all:
Does anyone know if rims from a 93 MX6 will fit a 93 626. The MX6 are 15"
and I think the 626 are 14". I was wondering about the bolt pattern.

Reply to this Message

Jeffrey Kaplan - 31 Jan 2004 05:52 GMT

While idly wondering if the Pakmara can really do that, Rick said:

; Does anyone know if rims from a 93 MX6 will fit a 93 626. The MX6 are 15"
; and I think the 626 are 14". I was wondering about the bolt pattern.

I think that as long as the number of bolts is the same, it's a
universal pattern. IOW, any five-bolt rim should fit the wheel.
Whether or not it will fit the +car+ is dependent on the width of the
rim and the outside diameter of the tire you put on the rim.

Signature

Jeffrey Kaplan <*> www.gordol.org
The from userid is killfiled <*> Send personal mail to gordol

"Democracies do not remain democracies for long if elected leaders use
undemocratic methods."- Colin Powell, 4/18/02

Reply to this Message

Rick - 31 Jan 2004 11:07 GMT

It's apparent I should have asked the Pakmara. Though it wouldn't know
either, the conversation would be more intelligent.
Does anyone else know whether the bolt patterns are the same?

> While idly wondering if the Pakmara can really do that, Rick said:
>
[quoted text clipped - 5 lines]
> Whether or not it will fit the +car+ is dependent on the width of the
> rim and the outside diameter of the tire you put on the rim.

Reply to this Message

First of One - 01 Feb 2004 04:44 GMT

Both the MX6 and 626 wheels have the bolt pattern 5 x 4.5". In fact, most
Mazda vehicles except the trucks and the Miata use that pattern, so Millenia
or even RX-7 wheels are in your grasp. Take a look over at the Tire Rack for
offset spacing.

Signature

First of One
Formula SAE Racing:
http://fsae.utoronto.ca/

> Hi all:
> Does anyone know if rims from a 93 MX6 will fit a 93 626. The MX6 are 15"
> and I think the 626 are 14". I was wondering about the bolt pattern.

Reply to this Message

Rick - 01 Feb 2004 19:56 GMT

Thank you, I appreciate the info.

> Both the MX6 and 626 wheels have the bolt pattern 5 x 4.5". In fact, most
> Mazda vehicles except the trucks and the Miata use that pattern, so Millenia
[quoted text clipped - 4 lines]
> > Does anyone know if rims from a 93 MX6 will fit a 93 626. The MX6 are 15"
> > and I think the 626 are 14". I was wondering about the bolt pattern.

Reply to this Message

Rate this thread: