The left rear window will only go up 90% and stops. Goes down fine. I have a
shop manual and took of the inside panel but see no adjustment or anything
wrong. I need help its cold outside.
macdrone - 06 Feb 2007 14:43 GMT
Well its a miswound cable down by the motor at the lower part of the
door, as long as its not been kinked too badly roll it all the way
down and satraighten it out and help it feed back in. I also suggest
greasing it, and the plastic slides.
> The left rear window will only go up 90% and stops. Goes down fine. I have a
> shop manual and took of the inside panel but see no adjustment or anything
> wrong. I need help its cold outside.
Tiger - 06 Feb 2007 15:29 GMT
I will also clean the switches... take it apart and clean the contacts
inside it... with resistance caused by oxidation, it will limit amount of
power to the motor.
L. D. Mormino - 07 Feb 2007 14:43 GMT
Thanks for the info. I see the cable and motor and the cable looks good but
how get it out to feed it back in? Larry
> The left rear window will only go up 90% and stops. Goes down fine. I have
> a shop manual and took of the inside panel but see no adjustment or
> anything wrong. I need help its cold outside.
L. D. Mormino - 11 Feb 2007 19:24 GMT
It is working, thanks so much.
> The left rear window will only go up 90% and stops. Goes down fine. I have
> a shop manual and took of the inside panel but see no adjustment or
> anything wrong. I need help its cold outside.