I have a low brake pedal but the pads on all four wheel appear very good
(changed about 10k miles ago). Park pedal is also low. Did a test with the
Park pedal lightly engaged and it did not raise noticeably the brake pedal
on a stop. Oh, fluid level has been normal with no need to add whatsoever.
Any thoughts on where to start trouble shooting?
-george, 2000 ML320
Tiger - 23 May 2007 05:26 GMT
Most likely your master cylinder is bad... it is dangerous and should be
changed right away. Bleed system so you flush all old brake fluids out.