I was told that my rear window motor was faulty. There is suppose to be a
control module built on top of the motor which controls the seats as well
as the two front windows, you have to buy a new motor. Have you ever heard
of that?
Huh?? Tell him to put down the bong. The motor and regulator is all that is on the rear and there
is no control unit..... The rears have noting to do with the fronts.
http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=210270%5F45Q&M=113%2E940&GA=722%2E62
3&CT=F&cat=45Q&SID=73&SGR=045&SGN=03
The front doors have a control unit in them for the seat and window ON THAT side. But for both to go
out AT the same
time is astronomically far fetched.
#14 here is the door control unit:
http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=210270%5F45Q&M=113%2E940&GA=722%2E62
3&CT=F&cat=45Q&SID=82&SGR=605&SGN=26
#10 is the seat switch:
http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=210270%5F45Q&M=113%2E940&GA=722%2E62
3&CT=F&cat=45Q&SID=82&SGR=063&SGN=02
> I was told that my rear window motor was faulty. There is suppose to be a
> control module built on top of the motor which controls the seats as well
> as the two front windows, you have to buy a new motor. Have you ever heard
> of that?
Bezo - 29 Jun 2007 14:38 GMT
Thanks bunch again, that didn't seem to make sense to me either. If the
control switches for the seats and windows are in the front how did they
come up with the rear? I don't know, anyway I would like to know why my
BAS indicator in the dash is coming on? I was also told there a part that
is going bad under the brake pedal What do you think?
Tiger - 02 Jul 2007 05:47 GMT
Maybe you just have a bad, old or weak battery. I know my folk's E320
spitted out BAS and SRS errors occasionally and that was solved when dealer
changed out the battery. Car started fine... no indication of weak battery.
Bezo - 05 Jul 2007 20:05 GMT
Thanks, so there is know part under the brake that has gone bad?
Tiger - 06 Jul 2007 15:56 GMT
Nothing was replaced except the car battery. The problem was the battery
voltage dropped too low during starting that the computer thinks something
is wrong because everything is measured by voltage and resistance.