The front left turn signal has failed. Actually, this happened once
before and I changed the bulb. The problem went away. I checked the
old bulb and it was good measured 1/2 ohm like the new one. It failed
again today. I checked the bulb and holder. There was continuity
between the two metal contacts on either side of the bulb holder
through the bulb. I don't see how to check operation inside the
socket. The tail signal and the signal on the side mirror work fine.
Help Bob
road apple - 07 Sep 2007 04:15 GMT
> The front left turn signal has failed. Actually, this happened once
> before and I changed the bulb. The problem went away. I checked the
[quoted text clipped - 4 lines]
> socket. The tail signal and the signal on the side mirror work fine.
> Help Bob
I found that one of the contacts on the bulb holder was burned. I
looked all over google to find a replacement. Looks like like I will
have to make a replacement. Maybe to make one with a contact from an
old set of points.
Tiger - 07 Sep 2007 15:53 GMT
Have you try to rub the contact clean with screwdriver? It might work.
road apple - 07 Sep 2007 23:21 GMT
> Have you try to rub the contact clean with screwdriver? It might work.
I used a very fine Swiss needle file and seems OK now. Thanks Bob