 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Mercedes-Benz Cars / September 2007560sel question
Greetings fellow Benz enthusiasts, How does one remove the alternator Does it come out with its "suround" ?And what is the purpose of the large round steel bar that spans the width of the car from under the battery to the fuse box? Thanks is advance! Rob the purpose of the large round steel bar that spans the width of the car from under the battery to the fuse box That's the stabilizer bar a/k/a sway bar. Its ends are attached to each front wheel so that as a wheel's spring compresses in a turn the bar lifts the opposite side's wheel to reduce the body's height and so its lean.  Signature© 2007 T.G.Lambach. Publication in any form requires prior written permission. On Sep 16, 1:07 pm, "-->> T.G. Lambach <<--" <"T.G. Lambach at NoHamorSpamcomcast.net"> wrote: > the purpose of the large round steel bar that > spans the width of the car from under the battery to the fuse box [quoted text clipped - 6 lines] > ? 2007 T.G.Lambach. Publication in any form requires prior written > permission. Thanks! A thorough cleaning of the engine compartment revealed some surface rust in the area below the battery tray, and it is on the mounts for that bar. So I was going to take the brackets off and clean and rust proof em. Regards, Rob |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.