 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Mercedes-Benz Cars / March 2008Oiler Kit Problem
The barbed plastic pieces in the oiler kit I recently got from the Benzin fit too loosely for me to install in my 380sl . So I was wondering if anyone has had this problem. Thanks The hose too loose or the fitting too loose? If the fitting too loose but does fit in there, then wrap it with teflon tape. 'DiscuzXブãƒã‚°' (http://blog.discuzx.com/ -- qqusu Thetube fittings are fine, Tiger, but barbed ends don't seem to grab well enough to hold the tube in place?? >The hose too loose or the fitting too loose? If the fitting too loose but >does fit in there, then wrap it with teflon tape. Then I would cut back the rubber tube so there is fresh narrow tubing. I always cut off existing section of tube where it was attached to existing barb... provided there is enough length left. Or 1/2 of the existing tube if length is tight... or replace if not possible at all. Just splice it. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.