I had a problem with the windshield wipers coming on when I signaled
right with the headlights on. Not cool. After being told it was the
signal stalk, the wiper motor, God's will I got to thinking and
discovered it was the wiper pulse relay. Took it apart and sanded the
contacts with 1000 grit sandpaper and so far it's working well.

The trunk was getting water in it and there was no leak form the
outside that i could find, tho i hadn't done the garden hose thing
yet. One morning I opened the trunk and there was a lot of water
inside the lid sloshing around the internal bracing. A couple 1/8th
inch holes along the truck lid lip that extends beyond the sill of the
trunk, and water streamed out like crazy. Don't know if that was all
the problem, but things are better.

Now to the Question part of our show:
I was trying to remove the steering wheel. Even my electric impact
wrench made no progress, tho it did shake the sh.t out of my dash and
I was lucky to have everything working when the fun was done (150k
with a working odo. Didn't want to kill it). I was looking at the
steering wheel and it struck me that it may not stand up to locking it
up with a bar thru the spokes to lock it. I've read that people are
turning the steering to the limit. Doesn't this transfer the stress to
the steering box? Some even suggested the steering lock. Maybe it's
too many years owning American cars, but that seems like the road to a
broken steering lock pawl. Was wondering if I should just mooch a
decent impact wrench and do it that way or is the bar thru the spokes
okay?

Any ideas on what would keep a rear defroster from working when all
the easy stuff has been cked? Same with an electric rt side mirror?

Thanks!