How to reset service indicator on the cluster?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Xtremehawk - 30 Aug 2004 00:38 GMT

All,
I just had a oil changed on my '00 ML320. Can anyone tell me or help to
find where to download or get instruction for resetting oil service
indicator? Thank you very much for you all help.

Curt

Reply to this Message

Josh - 30 Aug 2004 01:30 GMT

This is from an old post to a similar question:

> You use the same button that you press twice to display the remaining FSS
> mileage. It's usually the lowest of the three buttons on the left side of
> the instrument cluster; on yours, probably the (R) button.
>
> You also use the ignition switch. There are four positions of the

ignition

> key/steering lock:
>
[quoted text clipped - 10 lines]
> displayed. Within 10 seconds, turn key in steering lock to Position (0).
> Press and hold Button (R) while turning key in steering lock to Position

(2)

> again. The present status for days or distance is displayed once more.
> Continue to hold Button (R). After approximately 10 seconds, a signal
> sounds, and the display shows the reset mileage or distance. Release

Button

> (R).

> All,
> I just had a oil changed on my '00 ML320. Can anyone tell me or help to
> find where to download or get instruction for resetting oil service
> indicator? Thank you very much for you all help.
>
> Curt

Reply to this Message