> You either lost vacuum to your A/C system... or your servo for the defrost
> vents is bad.
> How is the defrost servo accessed?
From the glovebox, you need to remove the double lock plastic anchors that
you see in there by the front of the glovebox... take the top out, then the
bottom of each anchor. The servo is right on the left hand side... just move
it with your hand and you will know which flap it moves.
> What are the week points to check for leakage in A/C vacuum system?
Weak point in actually in the hood area... nearby your fusebox... you will
see one or two yellow checkvalves (weak point). The checkvalves have one in
and two out. This is where the A/C gets the vacuum.