The wheels on my 86 300SDL are original and showing signs of wear
(silver finish is faded and discolored). I had a quote for refinishing
them (redoing the silver finish, and then taking out any defects of
the wheel) of around $250/wheel. My question is, is there a simple
way to refinish the silver coating on the wheels oneself, to make
them look ok?
Otherwise, I may just buy some new non-mercedes rims from tirerack.com.
For the 86 SDL they have sizes 15x7 and 16x7.5 for approx $120/wheel,
which have the same look as the original rims, but I guess not of the
same
quality. Any suggestions as to size and whether such low-cost wheels
are
ok to use? Thanks,
--
Jeff
John Simpson - 17 Mar 2005 22:11 GMT
> The wheels on my 86 300SDL are original and showing signs of wear
> (silver finish is faded and discolored). I had a quote for refinishing
[quoted text clipped - 13 lines]
> --
> Jeff
Get another quote. In Connecticut, the highest quote I got was $150/wheel.
John
marlinspike - 18 Mar 2005 03:33 GMT
Get another quote from somewhere else...or see if there's a place that will
just walnut blast them and clear coat them. It looks neat.
http://www.mbcoupes.com/repairarticles/wheels/refinishing.htm
Richard
> The wheels on my 86 300SDL are original and showing signs of wear
> (silver finish is faded and discolored). I had a quote for refinishing
[quoted text clipped - 13 lines]
> --
> Jeff
Tiger - 18 Mar 2005 21:32 GMT
That's way too much... just go to a body shop and ask... we just had someone
who is a friend do it for $50 a wheel... sandblast and paint...
TireRack sells good wheels... they meet OE standard... so they are strong
enough. Sometime you have to question... fix up beat up old wheels or new
wheel? Sometime you are better off just buying new wheels.
trader4@optonline.net - 19 Mar 2005 22:22 GMT
Check Wheel Collision Center in Bath, PA. I think they do wheels for
more like $100-150, which includes repairing dings/dents, etc. I
haven't used them myself, but have hear good reports about them.