Wiring schematic for 300TE

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Chip L - 16 May 2005 15:27 GMT

My '92 300TE is in despirate need of an audio upgrade. The previous
installation of an outdated Clarion has left the wiring for the audio
circuit is disarray.

Any direction on a wiring diagram for a 300TE appreciated.

Chip L

Reply to this Message

Martin Joseph - 16 May 2005 18:25 GMT

> My '92 300TE is in despirate need of an audio upgrade. The previous
> installation of an outdated Clarion has left the wiring for the audio
> circuit is disarray.
>
> Any direction on a wiring diagram for a 300TE appreciated.

It's a radio for petes sake. You don't need a wiring diagram.

Reply to this Message

Chip L - 17 May 2005 15:27 GMT

You don't but I do. There are at least 20 wires coming out of the amp
and most have been cut are rewired

Reply to this Message

thomcasey@gmail.com - 17 May 2005 18:35 GMT

The color scheme from the old Clarion should pretty much match the
scheme of a new stereo. YOu really only need three wires from the old.
(+12v constant, +12v switched and Ground, if you have a power antena,
then there is a 4th). YOu should wire up the speakers yourself. You
need to bypass the fader.

Do an internet search and you will be able to find the information
needed for the wiring pin-outs. But, it is much easier to use a cheap
multi-meter. That is how I did it.

You should also look at replacing the old 6ohm speakers with real ones.

Reply to this Message