 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Mercedes-Benz Cars / August 2005Help!Twin turbo manifolds arrived today for 450SE
Purchased a set of twin turbo manifolds with 2 rebuilt Garrett T-61 turbos and hardware for my W116 450SE (1976). http://www.big-toys.net/detail.cgi143.htm My engine was rebuilt a while back to stage 1,by Paeco. http://www.paeco.com Engine work done will handle the turbos and don't anticipate any problems. My questions are,what should the timing be retarded to and what should I set the boost to (lbs)?Do you think I will need an adjustable fuel pressure regulator? Timing is set at TDC w/vacumm! TIA For those interested,you can view the "patient" at my photo album at http://stuck-in-alaska.tripod.com/mymercedes will add more photos when camera acts right! Ok your thinking ahead of me :-) > For those interested,you can view the "patient" at my photo album at > http://stuck-in-alaska.tripod.com/mymercedes > > will add more photos when camera acts right! > Ok your thinking ahead of me :-) > > For those interested,you can view the "patient" at my photo album at > > http://stuck-in-alaska.tripod.com/mymercedes > > > > will add more photos when camera acts right! Will do the documentary Al. Regards > For those interested,you can view the "patient" at my photo album at > http://stuck-in-alaska.tripod.com/mymercedes > > will add more photos when camera acts right! Quite a collection you got there! Looks like we have the same sickness! :-) On my heckflosse, the only body work I have to do is replace a rusted through section in the corner beneath the rear right door, any idear how hard it is to replace? cp Found this site for those with turbos on their Mercedes or whatever else,covers Garrett,KKK and others to add to your favorites.Very handy! http://turbocalculator.com/garrett.html > Quite a collection you got there! Looks like we have the same sickness! :-) > > On my heckflosse, the only body work I have to do is replace a rusted through section in the corner beneath the rear right door, any > idear how hard it is to replace? > > cp I have the same gaping hole on the drivers side of my W123.Saving that project for this winter,but will more than likely weld on a whole new lower quarter panel due to the arch infected with some rust also. > I have the same gaping hole on the drivers side of my W123.Saving that > project for this winter,but will more than likely weld on a whole new > lower quarter panel due to the arch infected with some rust also. Yeh, looks like I'll have to do the same. Maybe I'll solder it... cp |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.