Group,
My ABS light came on as I was driving my 1986 560sl and two blocks
later when I went to stop I found that my engine will not idle below
1500 RPM.. I feel that these two things are connected as they happened
almost as one event. I am wondering if a problem with the over volt
relay could explain high edle and ABS light on? Any how, I have not
had time to investigate yet but was wondering if any one could lend
some thoughts on what may have happened or what I should check?
Thank,s Bruce Buchanan
brujan@the-i.net
najurb
Karl - 15 Aug 2005 03:41 GMT
Check the 10A fuse in the top of the overvoltage relay. It is blown. Remove the kick panel on the
right side. It is above the fuse box.
> Group,
> My ABS light came on as I was driving my 1986 560sl and two blocks
[quoted text clipped - 8 lines]
> brujan@the-i.net
> najurb