HI There,
I got a problem when shifting the lever from Neutral to Drive position.
Whenever I shift from N to D, the car jerks and shift into the drive
harshly. However, If I shift from neutral to reverse, it shifts very
smoothly.
Can anyone advise where the problem is? I have checked the drive shaft
and the rubber coupling, and there was nothing wrong or lose.
Any suggestions will be deeply appreciated!
Many Thanks,
Joe.
Sean McClain - 20 Jan 2006 00:25 GMT
Is the motor cold when you shift into drive?
> HI There,
>
[quoted text clipped - 10 lines]
> Many Thanks,
> Joe.
Joe - 20 Jan 2006 15:13 GMT
The shift jerks when the engine is warm as well.
Please help.
Many Thanks,
Joe.
Ben - 20 Jan 2006 19:43 GMT
Does it do it consistently? My 91 300CE does the same thing most of the
time, but sometimes it shifts smoothly. Very weird.
> HI There,
>
[quoted text clipped - 10 lines]
> Many Thanks,
> Joe.
Joe - 21 Jan 2006 08:05 GMT
Yes, it does it all the time. The car jerks only slightly, if shifting
'very slowly' from neutral to drive. to let the oil pressure stabilise
a bit before shifting to the drive gear fron neutral, and let the
clutch to engage slowly.
Any inputs will be welcomed!
Many Thanks,
Joe.
Ben - 22 Jan 2006 16:52 GMT
Having the trans fluid flushed and replaced and replacing the pan gasket
helped the problem tremendously. Now it only does it sometimes.. there is
still a small leak in there somewhere. Is there any leakage coming from
your tranny?
Joe - 21 Jan 2006 08:09 GMT
Yes, it does it all the time. The car jerks only slightly, if shifting
'very slowly' from neutral to drive. to let the oil pressure stabilise
a bit before shifting to the drive gear fron neutral, and let the
clutch to engage slowly.
Any inputs will be welcomed!
Many Thanks,
Joe.