I replaired a bad blower motor regulator last year on my '92 300TE and
believe the same problem w/ my parents '86 300E.  No blower on heat/a/c
with auto climate or manual.

- I pulled the yellow/red/black connector located behind the master
cylinder and supplied 12v directly to the red and ran the black to
ground. With the car on and blower on high switch, I get no blower.

- I have not directly tested the blower.

- I do not see a fuse link located on the drivers strut. Where is the
fuse link for the blower located on an '86.

Sounds like blower regulator. Thoughts?

Chip L