 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / MINI / November 2004Brake Unions
Hi, Can somone please post the spanner sizes required to alter the brake adjuster and remove the brake pipe unions on a 1990 Mini? TIA... The brake adjuster should be a square, so ideally should be turned using a special spanner which can be bought quite cheaply for this, otherwise you may round off the square and have problems later. Brake line unions - I've renewed mine so they are 11mm spanner. Not sure whether 1990 Minis were metric or AF. By my maths, 11mm is approx. equal to 7/16" AF. Hope this helps. Squibby > Hi, Can somone please post the spanner sizes required to alter the brake > adjuster and remove the brake pipe unions on a 1990 Mini? > > TIA... > The brake adjuster should be a square, so ideally should be turned using a > special spanner which can be bought quite cheaply for this, otherwise you [quoted text clipped - 7 lines] > > Squibby And get yourself a hex flare nut spanner makes life easier. >>Hi, Can somone please post the spanner sizes required to alter the brake >>adjuster and remove the brake pipe unions on a 1990 Mini? >> >>TIA...
|
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.