Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / MINI / December 2005

Tip: Looking for answers? Try searching our database.

Dashpot spring

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Anthony - 01 Dec 2005 17:37 GMT
Hello

Got mine throught the MOT today, it only needed about 6 hours work.
Oddly enough no welding?

Anyway is there a way to tell if the spring is too hard or too soft?

I think mine is wrong as it runs fine under light throttle, try any more
and it coughs while the revs pick up and then starts accelerating properly.

Im guessing its the spring as everything else looks ok and I did fit a
(red?) spring a while ago and now wonder if it might be too hard?

cheers

-anthony
twowrunkles@hotmail.com - 01 Dec 2005 17:46 GMT
sound like no oil in the dashpot.
what spring do you have fitted? it should have one of the end coils
painted. should be red or yellow, but u don't specift the engine, and
what carb u are running.
twowrunkles@hotmail.com - 01 Dec 2005 17:53 GMT
sorry just reread your post. red is a light spring  (4.5oz) compared to
the yellow 8oz spring. did you fill up the dashpot after changing the
spring? generally a spring change requires a mixture adjustment.as a
general rule  richer with stiffer spring and  leaner  with softer ones
but it depends if the spring change is accompanied by other changes in
the induction tract.
ADD - 01 Dec 2005 18:14 GMT
I would reccomend a yellow spring as red is too soft.  How much modding have
you done to it  - stage 1? sports exhaust air filter and poss inlet and
exhaust manifolds?  With a red spring, when you floor it in 1st from
standing, the plunger in the carb flies up, chucking far too much petrol in
the engine, and you get a juddery if not stalling start, then it only takes
off after around 2000 rpm.

> Hello
>
[quoted text clipped - 13 lines]
>
> -anthony
anthony@godden79.fsnet.co.uk - 02 Dec 2005 11:22 GMT
Thanks for all the replies.

The engine is a 1275 MG metro lump with a 1.75 SU, K&N, and a minisport
sureflow (RC40 equivelent) exhaust.

The fault I have  occurs anywhere up to about 3000rpm and clears after
that. it doesnt require flooring any thing over about quarter throttle
causes the problem.

cheers

-anthony
out and about so different email
Anthony - 02 Dec 2005 18:19 GMT
> Thanks for all the replies.
>
[quoted text clipped - 4 lines]
> that. it doesnt require flooring any thing over about quarter throttle
> causes the problem.

Ah replying to my own posts, I changed the dashpot oil to 30W50 nd its
running much better now. Im guessing the spring is probrably ok and it
might have been the oil?

cheers

-anthony
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.