clubman 1275 GTS setting the twin cabs.

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

gregory.machin@gmail.com - 02 Mar 2006 11:52 GMT

Hi
Can anyone advise me on how to go about setting the twin carbs on a
leyland clubman 1275 GTS ?

At the moment she doesnt have the power I would expect from the 1275
GTS motor, I suspect that she needs a good tune up.

I have never setup an su carb before, so hints / tips would be grate ..

Many thanks
Gregory Machin
South Africa

Reply to this Message

Rob - 03 Mar 2006 02:33 GMT

> Hi
> Can anyone advise me on how to go about setting the twin carbs on a
[quoted text clipped - 8 lines]
> Gregory Machin
> South Africa

Firstly make sure your electrics are spot on (plugs, points, leads,
distributer - advance curve etc.)

Then you can refer to a workshop manual how to turn the carbys. There is
fairly comprehensive instruction on the proceedure which is fairly
simple to execute. (The carbys should have no leaks around the shafts
either.)

Reply to this Message