Speedo drive

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

RS - 29 Mar 2006 11:41 GMT

sorry for posting a lot of techie problems recently, i foind the best way of
finding out is asking someone who has done the job before;

after changing the speedo cable, found out the drive must not be turning. i
have removed the little screw and the plate on top - how do i remove the
whole drive as it seems still tight. i cannot see any more screws etc.

cheers
RS

Reply to this Message

Fitzy - 29 Mar 2006 17:09 GMT

It Just pulls straight out once the plate is removed,
very technically "jiggle"it round and it will slide out
Fitzy

> sorry for posting a lot of techie problems recently, i foind the best way
> of finding out is asking someone who has done the job before;
[quoted text clipped - 5 lines]
> cheers
> RS

Reply to this Message

RS - 30 Mar 2006 21:02 GMT

Thanks fitzy, the little bugger's out now, soon to be refitted with the
cable attached.

RS

Reply to this Message

Fitzy - 06 Apr 2006 17:07 GMT

> sorry for posting a lot of techie problems recently, i foind the best way
> of finding out is asking someone who has done the job before;
[quoted text clipped - 5 lines]
> cheers
> RS

it Just pulls out, jiggle it round a bit and pull it,
Fitzy

Reply to this Message