 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / MINI / December 2003thread size?
Hi All, Anyone know what the thread size of the the bleed nipples are on a cooper S front brake caliper? Steve. Hi, Yes, the thread size is 3/6 UNF, and the hexagon is 7/16 af. Keith > Hi All, > > Anyone know what the thread size of the the bleed nipples are on a cooper S > front brake caliper? > > Steve. > Hi, > Yes, the thread size is 3/6 UNF, and the hexagon is 7/16 af. > > Keith Give us a clue does that translate to 1/2" or should be 3/8 UNF? >>Hi All, >> [quoted text clipped - 5 lines] >> >>Steve. > > Hi, > > Yes, the thread size is 3/6 UNF, and the hexagon is 7/16 af. > > > > Keith > > Give us a clue does that translate to 1/2" or should be 3/8 UNF? Hi, Sorry about that. Slip of the finger. Should be 3/8 UNF. The hexagon is still 7/17 AF. Keith > >>Hi All, > >> [quoted text clipped - 5 lines] > >> > >>Steve. > > > Hi, > > > Yes, the thread size is 3/6 UNF, and the hexagon is 7/16 af. [quoted text clipped - 7 lines] > > Keith Hi, sorry, I promise I was not Pi**** when I typed that. For 7/17 read 7/16 Keith > > >>Hi All, > > >> [quoted text clipped - 6 lines] > > >> > > >>Steve. Thanks for the replys, now to get the broken one out! Steve. > > > > Hi, > > > > Yes, the thread size is 3/6 UNF, and the hexagon is 7/16 af. [quoted text clipped - 25 lines] > > > >> > > > >>Steve. > >>Anyone know what the thread size of the the bleed nipples are on a cooper > >> S front brake caliper? > > Yes, the thread size is 3/6 UNF, and the hexagon is 7/16 af. > Give us a clue does that translate to 1/2" or should be 3/8 UNF? 1/2"UNF bleed nipple???? I think maybe 3/16" might be closer to the mark? > > Give us a clue does that translate to 1/2" or should be 3/8 UNF? > 1/2"UNF bleed nipple???? > > I think maybe 3/16" might be closer to the mark? Then again.... I would think the drum brake bleed nipples are 1/4". I don't remember what the bleed nipples on my S disks looked like. Measure the diameter of the thread. MiniChicago wrote:11/30/03 3:39 PM Kind of remember the back and front being different sizes. One was 1/4 and the other closer to 3/8. >>> Give us a clue does that translate to 1/2" or should be 3/8 UNF? > [quoted text clipped - 8 lines] > I don't remember what the bleed nipples on my S disks looked like. > Measure the diameter of the thread. > MiniChicago wrote:11/30/03 3:39 PM > Kind of remember the back and front being different sizes. One was 1/4 and > the other closer to 3/8. Hi, Yes, the rears should be 1/4 UNF with a 5/16 AF hexagon. Keith > >>> Give us a clue does that translate to 1/2" or should be 3/8 UNF? > > [quoted text clipped - 8 lines] > > I don't remember what the bleed nipples on my S disks looked like. > > Measure the diameter of the thread. > > MiniChicago wrote:11/30/03 3:39 PM > > Kind of remember the back and front being different sizes. One was 1/4 [quoted text clipped - 4 lines] > > Keith That will be except the ones that are 3/8 UNF!!! There was one rear cylinder that used the same as the fronts. All fronts were 3/8 UNF..... calipers and cylinders.  SignatureRgds Steve steve@dsnclassics.co.uk www.dsnclassics.co.uk >>>>Anyone know what the thread size of the the bleed nipples are on a cooper >>>>S front brake caliper? [quoted text clipped - 6 lines] > > I think maybe 3/16" might be closer to the mark? The thread is 3/8 UNF and the AF (across flats) spanner 7/16" |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.