Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / MINI / February 2004

Tip: Looking for answers? Try searching our database.

Leaky Door Seals

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Taffy - 05 Feb 2004 15:35 GMT
With all this wet weather the floor of my Mini has got a fair bit wet.  It's
recently had new door seals fitted (although not genuine items from
Somerford Mini Spares) but the water still comes in.  I've taken the carpets
out and the trickle/stream seems to enter the car on both sides from under
the door seals.  So has anyone any idea how to stop it, I've heard of a
product called Dum Dum that works but I have no idea where to buy it.

Any help appreciated.

Taffy
fraggy - 06 Feb 2004 23:02 GMT
hi
Dum Dum is a seam sealer, you could use that but it might get a bit messy
or try a putty of some kind. What about mastic or a silicone bath sealer you
could then use the gun to squirt it into the back of the seal.

None of these should be needed if the seal is fitted correctly, but
sometimes with minis things just dont fit right.

fragged

> With all this wet weather the floor of my Mini has got a fair bit wet.  It's
> recently had new door seals fitted (although not genuine items from
[quoted text clipped - 6 lines]
>
> Taffy
Gordon Welsh - 07 Feb 2004 11:50 GMT
> With all this wet weather the floor of my Mini has got a fair bit wet.  It's
> recently had new door seals fitted (although not genuine items from
[quoted text clipped - 6 lines]
>
> Taffy

I just used clear silicone sealer that you can get from any DIY store.
Use the gun to squirt it into the groove of the seal, then squidge it
into place. Once its dry, you can use a sharp blade to trim off any
excess that may have squidged out.

G
k - 07 Feb 2004 12:11 GMT
Hi,
Most leaks from around the door area are caused by the outer window seal
being worn or split. Water runs down between the window and the seal, and
due to the angle of the door, it eventually gets to the inner door panel. If
the plastic sheeting is torn or unstuck from the panel, the water runs out
between the door trim and the door, over the sill and on to the floor, and
it's source is difficult to find. Well worth checking this out.

Keith
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.