 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / MINI / April 2004Panels needed
I have bought a little project car, (it would be a shame to let it die ,,,) 1988 Mini city, 33-000 miles full service history, very tidy inside ,, a bit tatty on the outside, I bought the car with the front panel and wings damaged, it came with a new front panel and two new front wings and "A" post panels, I have chopped it back to the "A" posts, and fitted the new front, I now need two sills and a rear valance, I am cutting the old sills off, and would rather fit the replacement parts ,not the oversized one's , any suggestions as to where to source these parts, other than a dealer, I have phoned around locally and they only have the oversized panels Merseyside area thanks Fitzy >I have bought a little project car, >(it would be a shame to let it die ,,,) [quoted text clipped - 9 lines] >I have phoned around locally and they only have the oversized panels >Merseyside area try Mini Machine, http://www.m-machine.co.uk/ Hi Howard, I have emailed for a price list, where are they located, Thanks Fitzy > >I have bought a little project car, > >(it would be a shame to let it die ,,,) [quoted text clipped - 11 lines] > > try Mini Machine, http://www.m-machine.co.uk/ Darlington. Great guys and really friendly. The Muffin Man > Hi Howard, > I have emailed for a price list, [quoted text clipped - 19 lines] > > > > try Mini Machine, http://www.m-machine.co.uk/ Cheers Muffy, is there a link or Phone number ? Fitzy > Darlington. Great guys and really friendly. > [quoted text clipped - 23 lines] > > > > > > try Mini Machine, http://www.m-machine.co.uk/ Here is their site http://www.m-machine.co.uk/ Here is what one of their all in one floors looks like ;) http://myweb.tiscali.co.uk/soulascendant/hole3.JPG http://myweb.tiscali.co.uk/soulascendant/hole6.JPG Will it be ready for Easter? The Muffin Man > Cheers Muffy, > is there a link or Phone number ? [quoted text clipped - 28 lines] > > > > > > > > try Mini Machine, http://www.m-machine.co.uk/ > Here is their site > [quoted text clipped - 9 lines] > > The Muffin Man Hi Muffy Basically its roadworthy now, I just thought that while I had the welding gear out I would do a half descent job and change all the panels that are looking a bit shabby, The sills and rear valance could be patched up, but with a little bit more effort, I could fit new panels, and have piece of mind, and I know it will add years more use to this low mileage car, I have also just picked up a set of good Minilites with Falkens, for ?100, they will be going on it when its finished,,, I can just picture it now,,,, Black ,,white roof,,, stainless bumpers ,, chrome big bore exhaust,, Cooper grille,, new headlights,,, basically all the bits I had in the garage that I had taken off and swapped for better stuff on my Sidewalk, "might do the Dales Run in it this year Muffy" I have emailed M-Machine for the parts, Thanks to all who responded, Fitzy I should be doing the dales in the one in the photos ;) We can meet and you can point to where the whole used to be!! The Muffin Man > > Here is their site > > [quoted text clipped - 28 lines] > Thanks to all who responded, > Fitzy I will look out for you on the Dales run, Fitzy > I should be doing the dales in the one in the photos ;) > [quoted text clipped - 38 lines] > > Thanks to all who responded, > > Fitzy And you didn't even point out that I said "whole" instead of "hole". What a guy ;) The Muffin Man > I will look out for you on the Dales run, > Fitzy [quoted text clipped - 43 lines] > > > Thanks to all who responded, > > > Fitzy > And you didn't even point out that I said "whole" instead of "hole". > [quoted text clipped - 3 lines] > >>Snip>> This is the result of years of training ,,, ;-) "I spotted the mistake" ,, and quickly rectified it in my head,,,, I was trained to do this by "THE WIFE" Fitzy >Hi Howard, >I have emailed for a price list, >where are they located, >Thanks >Fitzy The prices are on their site. They're certainly not the cheapest, but the panels they produce fit perfectly and are of great quality! The only other places I would buy panels from are Heritage and Somerford Mini. I'm hopefully going to be ordering a ton of panels from M-Machine and Heritage very soon, for my MK1 restorations! > >Hi Howard, > >I have emailed for a price list, [quoted text clipped - 9 lines] > I'm hopefully going to be ordering a ton of panels from M-Machine and > Heritage very soon, for my MK1 restorations! Sounds like your going to be busey this summer, ? ;-) Fitzy |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.