984g63t swap to japanese 4g63t

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

jerrod - 28 Apr 2005 05:02 GMT

I put a Japanese 4g63t engine in my 98 GST. It is so weird the car
will start up for about 3 to 5 seconds and then shut off. What could
it be???????? Could it be my alarm system not reading my new engine???
Please someone that knows or has experanced this please reply..

Reply to this Message

Nobody U. Know - 28 Apr 2005 12:23 GMT

The 98 expects a cam and crank angle sensor. Does your JDM have these
outputs? If it has just the cam sensor, like the 1G, you will need to do the
2G to 1G cam sensor swap per RREs VFAQ. It's not hard to do and will allow
you to adjust timing.

Signature

Todd Honea

> I put a Japanese 4g63t engine in my 98 GST. It is so weird the car
> will start up for about 3 to 5 seconds and then shut off. What could
> it be???????? Could it be my alarm system not reading my new engine???
> Please someone that knows or has experanced this please reply..

Reply to this Message

puppydog - 28 Apr 2005 19:29 GMT

did you swap the ecm also what year is the 2.0 out of

> I put a Japanese 4g63t engine in my 98 GST. It is so weird the car
> will start up for about 3 to 5 seconds and then shut off. What could
[quoted text clipped - 5 lines]
> Articles individually checked for conformance to usenet standards
> Topic URL: http://www.autoforumz.com/Mitsubishi-984g63t-swap-japanese-4g63t-ftopict1177

37.html

> Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=571284
>
> Posted Via Usenet.com Premium Usenet Newsgroup Services
> ----------------------------------------------------------
> ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
> ----------------------------------------------------------

Reply to this Message