Mitsubishi - Rear Exhaust Mufflers E16-35

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

lachie63@gmail.com - 25 Sep 2006 03:30 GMT

Hi there,

I've got some Mitsubishi Exhaust's i'd like to know what model they
suit. I tried calling Mitsubishi Australia and they were no good and
couldn't come up with a description from the part number, so I thought
I'd try on here.

They seem pretty new, look stainless steel. With part number printed
after misubishi logo of : E16-35.

Cheers,
Lachlan

Reply to this Message

Stewart DIBBS - 25 Sep 2006 12:24 GMT

> I've got some Mitsubishi Exhaust's... look stainless steel. With part
> number printed
> after misubishi logo of : E16-35.

Perhaps if you posted a picture ...?

Stewart DIBBS
www.pixcl.com/lancerproject.htm

Reply to this Message

lachie63@gmail.com - 27 Sep 2006 07:55 GMT

Good Idea,

I put them up on a quick site:

http://home.exetel.com.au/lachie63

thanks for any input.

Lachlan

> > I've got some Mitsubishi Exhaust's... look stainless steel. With part
> > number printed
[quoted text clipped - 4 lines]
> Stewart DIBBS
> www.pixcl.com/lancerproject.htm

Reply to this Message

Stewart DIBBS - 27 Sep 2006 12:36 GMT

> Good Idea,
>
> I put them up on a quick site:
>
> http://home.exetel.com.au/lachie63

OK, its from a small engine car (see the pipe diameter) eg Lancer, presumed
Australian market) that has the muffler on the LHS. I'm guessing these are
old stock, so look at late 80's early 90's.

Signature

Stewart DIBBS
www.pixcl.com/lancerproject.htm

Reply to this Message

lachie63@gmail.com - 29 Sep 2006 00:03 GMT

Thanks for that.

I might have to start ducking my head under a few Lancers in the
carpark to see what I can work out.

Would you agree they would likely be stainless? My only apprehension
was that a magnet stuck to them.

Measurements are 1 3/4" ID pipe, 2" ID Exhaust Tip. 17" length muffler
body.

Thanks for input.

> > Good Idea,
> >
[quoted text clipped - 5 lines]
> Australian market) that has the muffler on the LHS. I'm guessing these are
> old stock, so look at late 80's early 90's.

Reply to this Message