> Hi and thanks for looking. The ECM went on my Eclipse and was wondering
> if someone got one they know is good and would like to let it go. thanks
Hi and guess what. Since I posted this first message I got one for 100
then the same thing happend again. Would you know what would blow ECMs?
in my car? thanks. If you know please eMail me at goodm2@netzero.net,
thanks. Andrew
> go to www.car-part.com and you will find a used one very cheap.......
>
> > Hi and thanks for looking. The ECM went on my Eclipse and was wondering
> > if someone got one they know is good and would like to let it go. thanks
Andrea - 26 Dec 2006 20:15 GMT
Mr.G (@¿@) ha scritto:
> Hi and guess what. Since I posted this first message I got one for 100
> then the same thing happend again. Would you know what would blow ECMs?
> in my car? thanks. If you know please eMail me at goodm2@netzero.net,
> thanks. Andrew
The main trouble might be on ISC (idle speed control). If it doesn't
work, it will burn your ECM. So it's better to change both ISC and ECM.
I bought mine at this ebay shop:
http://cgi6.ebay.it/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=motoguys_garag
e&completed=0&sort=3&since=-1
Otherwise, you have to check all the wires in and out your ECM to be sound.
Best wishes
andrea
Mr.G (@¿@) - 19 Jan 2007 20:42 GMT
hi again, I'm Itialian but don't speak it or read it!
where do you live?
> Mr.G (@¿@) ha scritto:
> > Hi and guess what. Since I posted this first message I got one for 100
[quoted text clipped - 11 lines]
> Best wishes
> andrea
Andrea - 19 Jan 2007 20:46 GMT
Mr.G (@¿@) ha scritto:
> hi again, I'm Itialian but don't speak it or read it!
> where do you live?
VERONA.
email me at
andrea.zambelli-1964 AT poste.it
Andrea - 26 Dec 2006 20:21 GMT
Mr.G (@¿@) ha scritto:
> Hi and guess what. Since I posted this first message I got one for 100
> then the same thing happend again. Would you know what would blow ECMs?
> in my car? thanks. If you know please eMail me at goodm2@netzero.net,
> thanks. Andrew
just another thing: ECM condensers are not so tough, so the main trouble
on those units is leaking acid from comdensers on the main board.
Open the old ECM and check it or make it checked by an electronic shop,
they'll clean it and substitute old condensers with new ones, tougher if
possible, and check the unit work.
It's a trivial thing, but this is the weaker point in DSM's.
andrea
simpleton - 27 Dec 2006 22:11 GMT
> Mr.G (@¿@) ha scritto:
>> Hi and guess what. Since I posted this first message I got one for 100
[quoted text clipped - 11 lines]
>
> andrea
Mr.G (@¿@) - 19 Jan 2007 20:39 GMT
sorry it took so long to reply, guess what again, you're right the idle
speed was bad just before the ecu blew and now the idel speed is
correct i.e.: it at 1500 while car is moving.
but I'll see about the capacitors (electrolic) I heard it from someone
else about them going bad but did not know you can see a leak. thanks,
> Mr.G (@¿@) ha scritto:
> > Hi and guess what. Since I posted this first message I got one for 100
[quoted text clipped - 11 lines]
>
> andrea