1987 mitsubishi L300

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

mawhatt - 27 Apr 2008 16:22 GMT

Hi I have a 1987 L300 and the fusible link that comes off the battery
keeps melting (doesn’t blow) It had a 60amp fuse in it so thats what i
keep replacing it with is this too big to start with. I have replaced
the alternator and starter motor and it still happens.

Does anyone else have any other suggestions.

Cheers

Signature

Posted at author's request, using moderated http://www.AutoBoardz.com interface
Thread archive: http://www.AutoBoardz.com/1987-mitsubishi-L300-ftopict247015.html

Reply to this Message

Stewart DIBBS - 29 Apr 2008 23:21 GMT

> Hi I have a 1987 L300 and the fusible link that comes off the battery
> keeps melting (doesn't blow)

The problem is there is a poor (ie resistive), likely corroded connection
somewhere. Since its an 87, pull the main fuse block off the firewall and
look under at the fuse links. Some where you'll find a corroded connector
that's the cause of the heat.

Do whatever it takes to repair the connection.

Signature

regards
Stewart DIBBS
www.pixcl.com/lancerproject

Reply to this Message

mawhatt - 01 May 2008 08:22 GMT

thanks I’ll have a loo

> "mawhatt" <none@000.com> wrote in message
> news:1199628_83b9bdc5916ba82ca310f0e422db98e7@autoboardz.com...
[quoted text clipped - 11 lines]
>
> Do whatever it takes to repair the connection.

Reply to this Message

Rate this thread: